カテゴリ別リスト

SOFC(ミクロスケール,FIB-SEM)

  1. Local Evolution of Triple Phase Boundary in Solid Oxide Fuel Cell Stack after Long-Term Operation
    G. Brus, H. Iwai, Y. Otani, M. Saito, H. Yoshida, J.S. Szmyd
    Fuel Cells 15(3) (2015) 545-548. Link
  2. Local Evolution of Anode Microstructure Morphology in a Solid Oxide Fuel Cell after Long-Term Stack Operation
    G. Brus, H. Iwai, A. Sciazko, M. Saito, H. Yoshida, J.S. Szmyd
    Journal of Power Sources 288 (2015) 199-205. Link
  3. Change of an anode’s microstructure morphology during the fuel starvation of an anode-supported solid oxide fuel cell
    G. Brus, K. Miyoshi, H. Iwai, M. Saito, H. Yoshida
    International Journal of Hydrogen Energy 40 (2015) 6927-6934. Link
  4. Tortuosity of an SOFC anode estimated from saturation currents and a mass transport model in comparison with a real micro-structure
    G. Brus, K. Miyawaki, H. Iwai, M. Saito, H. Yoshida
    Solid State Ionics 265 (2014) 13-21. Link
  5. Comprehensive understanding of the active thickness in solid oxide fuel cell anodes using experimental, numerical and semi-analytical approach
    K. Miyawaki, M. Kishimoto, H. Iwai, M. Saito, H. Yoshida
    Journal of Power Sources 267 (2014) 503-514. Link
  6. Effect of Composition Ratio of Ni-YSZ Anode on Distribution of Three-Phase Boundary Density and Power Generation Performance
    M. Kishimoto, K. Miyawaki, H. Iwai, M. Saito, H. Yoshida
    Fuel Cells 13(4) (2013) 476-486. Link
  7. Improvement of the Sub-grid-scale Model Designed for 3D Numerical Simulation of Solid Oxide Fuel Cell Electrodes Using an Adaptive Power Index
    M. Kishimoto, H. Iwai, K. Miyawaki, M. Saito, H. Yoshida
    Journal of Power Sources 223 (2013) 268-276. Link
  8. Microstructural Change of Ni-GDC Cermet Anode in the Electrolyte-supported Disk-type SOFC upon Daily Start-up and Shut-down Operations
    K. Eguchi, N. Kamiuchi, J.Y. Kim, H. Muroyama, T. Matsui, M. Kishimoto, M. Saito, H. Iwai, H. Yoshida, N. Shikazono, N. Kasagi, J. Akikusa, H. Eto, D. Ueno, M. Kawano, T. Inagaki
    Fuel Cells 12(4) (2012) 537-542. Link
  9. Three-Dimensional Simulation of SOFC Anode Polarization Characteristics Based on Sub-Grid Scale Modeling of Microstructure
    Masashi Kishimoto, Hiroshi Iwai, Motohiro Saito, Hideo Yoshida
    Journal of The Electrochemical Society 159(3) (2012) B315-B323. Link
  10. Quantitative evaluation of solid oxide fuel cell porous anode microstructure based on focused ion beam and scanning electron microscope technique and prediction of anode overpotentials
    Masashi Kishimoto, Hiroshi Iwai, Motohiro Saito, Hideo Yoshida
    Journal of Power Sources 196 (2011) 4555-4563. Link
  11. Quantification of SOFC Anode Microstructure Based on Dual Beam FIB-SEM Technique
    H. Iwai, N. Shikazono, T. Matsui, H. Teshima, M. Kishimoto, R. Kishida, D. Hayashi, K. Matsuzaki, D. Kanno, M. Saito, H. Muroyama, K. Eguchi, N. Kasagi, H. Yoshida
    Journal of Power Sources, 195 (2010) 955-961. Link

 

SOFC(メゾスケール)

  1. Effect of characteristic lengths of electron, ion, and gas diffusion on electrode performance and electrochemical reaction area in a solid oxide fuel cell
    Akio Konno, Hiroshi Iwai, Motohiro Saito, Hideo Yoshida
    Heat Transfer Asian Research 41 (2012) 700-718. Link
  2. A corrugated mesoscale structure on electrode-electrolyte interface for enhancing cell performance in anode-supported SOFC
    Akio Konno, Hiroshi Iwai, Motohiro Saito, Hideo Yoshida
    Journal of Power Sources 196 (2011) 7442-7449. Link
  3. Power generation enhancement of solid oxide fuel cell by cathode-electrolyte interface modification in mesoscale assisted by level set-based optimization calculation
    Hiroshi Iwai, Atsushi Kuroyanagi, Motohiro Saito, Akio Konno, Hideo Yoshida, Takayuki Yamada, Shinji Nishiwaki
    Journal of Power Sources 196 (2011) 3485-3495. Link
  4. Mesoscale-structure control at anode/electrolyte interface in soild oxide fuel cell
    Akio Konno, Hiroshi Iwai, Kenji Inuyama, Atsushi Kuroyanagi, Motohiro Saito, Hideo Yoshida, Kazufumi Kodani, Kuniaki Yoshikata
    Journal of Power Sources 196 (2011) 98-109. Link
  5. SOFC電極性能と反応領域に対する電子・イオン・ガス拡散に関する特性長さの影響
    紺野昭生, 岩井裕, 齋藤元浩, 吉田英生
    Thermal Science & Engineering 18(3) (2010) 103-114. Link

 

SOFC(マクロスケール・スタック解析・システム解析)

  1. Performance evaluation of a direct-biogas solid oxide fuel cell-micro gas turine (SOFC-MGT) hybrid combined heat and power (CHP) system
    Suranat Wongchanapai, Hiroshi Iwai, Motohiro Saito, Hideo Yoshida
    Journal of Power Sources 223 (2013) 9-17. Link
  2. Performance evaluation of an integrated small-scale SOFC-biomass gasification power generation system
    Suranat Wongchanapai, Hiroshi Iwai, Motohiro Saito, Hideo Yoshida
    Journal of Power Sources 216 (2012) 314-322. Link
  3. Selection of suitable operating conditions for Planar Anode-supported Direct-internal-reforming Solid-Oxide Fuel Cell
    Suranat Wongchanapai, Hiroshi Iwai, Motohiro Saito, Hideo Yoshida
    Journal of Power Sources 204 (2012) 14-24. Link
  4. Numerical simulation of intermediate-temperature direct-internal-reforming planar solid oxide fuel cell
    H. Iwai, Y. Yamamoto, M. Saito, H. Yoshida
    Energy 36 (2011) 2225-2234. Link
  5. Numerical study of SOFC based on electrolyte with mixed ionic and electronic conductivity
    Hiroshi Iwai, Tatsuo Ishikawa, Hideo Yoshida
    Thermal Science and Engineering 13(4) (2006) 37-38.
  6. Comprehensive Numerical Modeling and Analysis of a Cell-Based Indirect Internal Reforming Tubular SOFC
    Takafumi Nishino, Hiroshi Iwai, Kenjiro Suzuki
    Trans. ASME Journal of Fuel Cell Science and Technology 3(1) (2006) 33-44. Link
  7. 円筒型間接内部改質SOFCの包括的数値シミュレーション
    西野貴文,岩井裕,鈴木健二郎
    日本機械学会論文集(B編), 71(711) (2005) 2800-2807

 

改質

  1. The limiting process in steam methane reforming with gas diffusion into a porous catalytic wall in a flow reactor
    Motohiro Saito, Junichi Kojima, Hiroshi Iwai, Hideo Yoshida
    International Journal of Hydrogen Energy 40(29) (2015) 8844-8855. Link
  2. Comprehensive method for evaluating reaction rates of steam methane reforming on catalyst-coated channel surface with consideration of limiting steps
    K.K. Lin, M. Saito, J.-I. Kojima, S. Kuratsu, H. Iwai, H. Yoshida
    Journal of Thermal Science and Technology 8 (2013) 165-177. Link
  3. Deduction of Proper Reaction Rate of Steam Methane Reforming over Catalyst Surface Validated with a Combination of One- and Two-Dimensional Simulations
    Kyaw Kyaw Lin, Motohiro Saito, Yasuhiro Niina, Kimitaka Ikemura, Hiroshi Iwai, Hideo Yoshida
    Journal of Thermal Science and Technology 7 (2012) 633-648. Link

 

二次電池

  1. Simulation of solid oxide iron-air battery: Effects of heat and mass transfer on charge/discharge characteristics
    Hiroko Ohmori, Hiroshi Iwai
    Journal of Power Sources 286 (2015) 264-275. Link
  2. Numerical simulation of gas diffusion effects on charge/discharge characteristics of a solid oxide redox flow battery
    Hiroko Ohmori, Syoichi Uratani, Hiroshi Iwai
    Journal of Power Sources 208 (2012) 383-390. Link

 

Heat Transfer

  1. 航空機の空調システム設計(第1 報:システム作動における高圧除湿系統の機器能力の影響)
    佐藤 理,岩井 裕,吉田 英生
    日本機械学会論文集 80(820) (2014) TEP0360 (2014) Link
  2. 熱回路網法による空気調和用熱交換器性能の予測 : パスパターン適正化によ る蒸発器能力向上と気流バイパス抑制 (熱工学,内燃機関,動力など)
    加賀 邦彦 , 古藤 悟 , 大串 哲朗 , 吉田 英生
    日本機械学会論文集(B編) 75(758) (2009) 2049-2054.
  3. ダクト内バックステップ流れの熱伝達に関する数値解析 (流体粒子軌跡のパターンについて)
    稲岡恭二,西村路子,岩井 裕,千田 衞
    日本機械学会論文集(B編) 75(749) (2009) 125-131.
  4. 熱回路網法による空気調和用熱交換器性能の予測 : 蒸発器の能力に対する風 量不均一と冷媒パスパターンの影響 (熱工学,内燃機関,動力など)
    加賀 邦彦 , 古藤 悟 , 大串 哲朗 , 吉田 英生
    日本機械学会論文集(B編) 75(749) (2009) 117-124.
  5. ダクト内バックステップ流れの熱伝達に関する数値解析 (入口速度分布とアスペクト比の影響)
    稲岡恭二,西村路子,岩井 裕,千田 衞
    日本機械学会論文集(B編) 74(745) (2008) 2006-2013.
  6. 水蒸発による静圧効果が付加された超微細多孔質体ハイブリッド気体軸受
    吉田英生,石部英臣,吉冨 聡,齋藤元浩,松井裕樹,江川 猛,岩井 裕,坪田宏之,桑原健雄,金丸一宏
    日本機械学会論文集(B編) 72(722) (2006) 2562-2569.
  7. Performance of Wire Springs as Extended Heat Transfer Surface for Compact Heat Exchangers
    Hiroshi Iwai, Soushi Kawakami, Kenjiro Suzuki, Junichi Tsuji, Tetsuo Abiko
    Journal of Thermal Science and Technology 1(2) (2006) 78-89. Link
  8. Effect of the Plate Thermal Resistance on the Heat Transfer Performance of a Corrugated Thin Plate Heat Exchanger
    Hiroshi Iwai, Kazuya Tatsumi, Kenjiro Suzuki
    Heat Transfer Asian Research 35(3) (2006) 209-223. Link
  9. 凹凸プレート熱交換器におけるプレート内部熱抵抗の影響
    岩井裕,巽和也,鈴木健二郎
    日本機械学会論文集(B編), 71(705) (2005) 1406-1413
  10. Laminar convective heat transfer from a circular cylinder exposed to a low frequency zero-mean velocity oscillating flow
    Hiroshi Iwai, Tomoyuki Mambo, Naoki Yamamoto and Kenjiro Suzuki
    International Journal of Heat and Mass Transfer 47 (2004) 4659-4672. Link
  11. Numerical Analysis for Heat Transfer Characteristics of an Oblique Discrete Rib Mounted in a Square Duct
    Kazuya Tatsumi, Hiroshi Iwai, Kyoji Inaoka, Kenjiro Suzuki
    Numerical Heat Transfer Part A 44 (2003) 811-831. Link
  12. Conjugate heat transfer for a minimal unit model of counter flow type corrugated primary surface heat exchangers
    H. Iwai, H. Watanabe, K. Tatsumi and K. Suzuki
    International Journal of Heat Exchangers 4(1) (2003) 1-26.
  13. 多孔質体内熱流動と固体壁内熱伝導の連成解析
    小田豊,岩井裕,鈴木健二郎,吉田英生
    日本機械学会論文集(B編) 69(679) (2003) 674-681.